Special Design for Semi Auto Capsule Filler - LQ-DTJ / LQ-DTJ-V Semi-auto Capsule Filling Machine – UPG

Short Description:

Product Detail

Product Tags

Feedback (2)

It really is our obligation to satisfy your requirements and efficiently serve you. Your fulfillment is our greatest reward. We're hunting forward to your check out for joint development for Semi Auto Tube Sealer, Labeling Machine For Round Bottles, Packaging Customization, We attend seriously to produce and behave with integrity, and by the favor of customers at home and abroad in the xxx industry.

Special Design for Semi Auto Capsule Filler - LQ-DTJ / LQ-DTJ-V Semi-auto Capsule Filling Machine – UPG Detail:

APPLY PHOTOS

LQ-DTJ (3)

INTRODUCTION

This type capsule filling machine is a new efficient equipment based on old type after research and development: easier more intuitive and higher loading in capsule dropping, U-turning, vacuum separation in comparison with the old type. The new type of capsule orientating adopts columns pill positioning design, which shortens the time in the replacement of mould from the original 30 minutes to 5-8 minutes. This machine is one type of electricity and pneumatic combined control, automatic counting electronics, programmable controller and frequency conversion speed regulating device. Instead of manual filling, it reduces labor intensity, which is the ideal equipment for capsule filling for small and medium-sized pharmaceutical companies, pharmaceutical research and development institutions and hospital preparation room.

The machine consists of capsule-feeding, U-turning and separating mechanism, material medicine-filling mechanism, locking device, electronic speed varying and adjusting mechanism, electrical and pneumatic control system protection device as well as accessories such as vacuum pump and air pump.

China machine-made capsules or the imported are applicable to this machine, with which the finished product qualification rate can be above 98%.

LQ-DTJ (1)

TECHNICAL PARAMETER

Model	LQ-DTJ-C (Semi-Auto Locking)	LQ-DTJ-V (Automatic Locking)
Capacity	15000-28000pcs/h (with single set mould)	15000-28000pcs/h (with single set mould)
Applicable Capsules	000#/00#/0#/1#/2#/3#/4#/5#	000#/00#/0#/1#/2#/3#/4#/5#
Applicable Capsules	machine-made standard capsules	machine-made standard capsules
Filling Material	Powder or small granules(can not be wet and sticky）	Powder or small granules（can not be wet and sticky）
Air Pressure	0.03m³/min,0.7Mpa	0.03m³/min,0.7Mpa
Vacuum Pump	40m³/h	40m³/h
Total Power	2.12kw，380V，50Hz，3Phs	2.12kw，380V，50Hz，3Phs
Overall Dimension	13008001750mm (LWH)	13008001750mm (LWH)
Weight	400kg	400kg

TERMS OF PAYMENT AND WARRANTY

Terms of Payment: 30% deposit by T/T when confirming the order，70% balance by T/T before shipping. Or irrevocable L/C at sight.

Delivery Time: 14 days after receiving deposit.

Warranty: 12 months after B/L date

Product detail pictures:

Related Product Guide:

As for competitive charges, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we have been the lowest around for Special Design for Semi Auto Capsule Filler - LQ-DTJ / LQ-DTJ-V Semi-auto Capsule Filling Machine – UPG , The product will supply to all over the world, such as: Pakistan, Bangladesh, Finland, We have been seeking the chances to meet all the friends from both at home and abroad for the win-win cooperation. We sincerely hope to have long-term cooperation with all of you on the bases of mutual benefit and common development.

Bottle Labeling Machine