0086-13916136366
sales@shanghai-upg.com

Manufacturer for Screw Conveyor For Powder - LQ-DTJ / LQ-DTJ-V Semi-auto Capsule Filling Machine – UPG

Manufacturer for Screw Conveyor For Powder - LQ-DTJ / LQ-DTJ-V Semi-auto Capsule Filling Machine – UPG Featured Image
  • Manufacturer for Screw Conveyor For Powder - LQ-DTJ / LQ-DTJ-V Semi-auto Capsule Filling Machine – UPG

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We stick to our enterprise spirit of "Quality, Efficiency, Innovation and Integrity". We aim to create more value for our customers with our rich resources, advanced machinery, experienced workers and excellent services for Cookies Packing Machine, Automatic Tube Filling And Sealing Machine, China Flat Labeling Machine, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.We strongly believe that we can do better and better.
Manufacturer for Screw Conveyor For Powder - LQ-DTJ / LQ-DTJ-V Semi-auto Capsule Filling Machine – UPG Detail:

APPLY PHOTOS

LQ-DTJ (3)

INTRODUCTION

This type capsule filling machine is a new efficient equipment based on old type after research and development: easier more intuitive and higher loading in capsule dropping, U-turning, vacuum separation in comparison with the old type. The new type of capsule orientating adopts columns pill positioning design, which shortens the time in the replacement of mould from the original 30 minutes to 5-8 minutes. This machine is one type of electricity and pneumatic combined control, automatic counting electronics, programmable controller and frequency conversion speed regulating device. Instead of manual filling, it reduces labor intensity, which is the ideal equipment for capsule filling for small and medium-sized pharmaceutical companies, pharmaceutical research and development institutions and hospital preparation room.

The machine consists of capsule-feeding, U-turning and separating mechanism, material medicine-filling mechanism, locking device, electronic speed varying and adjusting mechanism, electrical and pneumatic control system protection device as well as accessories such as vacuum pump and air pump.

China machine-made capsules or the imported are applicable to this machine, with which the finished product qualification rate can be above 98%.

LQ-DTJ (1)

TECHNICAL PARAMETER

Model LQ-DTJ-C (Semi-Auto Locking) LQ-DTJ-V (Automatic Locking)
Capacity 15000-28000pcs/h (with single set mould) 15000-28000pcs/h (with single set mould)
Applicable Capsules 000#/00#/0#/1#/2#/3#/4#/5# 000#/00#/0#/1#/2#/3#/4#/5#
machine-made standard capsules machine-made standard capsules
Filling Material Powder or small granules(can not be wet and sticky） Powder or small granules（can not be wet and sticky）
Air Pressure 0.03m3/min,0.7Mpa 0.03m3/min,0.7Mpa
Vacuum Pump 40m3/h 40m3/h
Total Power 2.12kw，380V，50Hz，3Phs 2.12kw，380V，50Hz，3Phs
Overall Dimension  1300*800*1750mm (L*W*H) 1300*800*1750mm (L*W*H)
Weight 400kg 400kg

TERMS OF PAYMENT AND WARRANTY

Terms of Payment: 30% deposit by T/T when confirming the order，70% balance by T/T before shipping. Or irrevocable L/C at sight.

Delivery Time: 14 days after receiving deposit.

Warranty: 12 months after B/L date

Product detail pictures:

Manufacturer for Screw Conveyor For Powder - LQ-DTJ / LQ-DTJ-V Semi-auto Capsule Filling Machine – UPG detail pictures

Related Product Guide:
We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Manufacturer for Screw Conveyor For Powder - LQ-DTJ / LQ-DTJ-V Semi-auto Capsule Filling Machine – UPG , The product will supply to all over the world, such as: Hyderabad, Madrid, USA, Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
    • The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
    5 Stars By Carol from Iran - 2017.11.11 11:41
    High Quality, High Efficiency, Creative and Integrity, worth having long-term cooperation! Looking forward to the future cooperation!
    5 Stars By Tyler Larson from Lesotho - 2017.06.29 18:55
    Write your message here and send it to us

    related products